• High-end, Hi-strand speaker wire.
• Twisted bare copper conductors.
• PVC Sunlight Resistant jacket.
• NEC CM, CL2 rating.
• Polypropylene insulation is super flexible 
• Sequential foot markings and room legend printed on jacket
• Made in the USA

The Xantech D5RHK 4 Source, 4 Zone Digital Audio Distribution Hub with DIGI-5 Technology provides the ability to listen to 4 different audio sources in up to 28 separate zones. The Xantech D5RHK connects using CAT-5 and speaker wire, making the unit very reliable and easy to install. Any digital or analog audio source can be connected directly to the D5RHK's Digital Audio Distribution Hub. D5KP Amplified Keypads are connected to the D5RHK's hub using CAT-5 wiring.

Imagine a VGA cable you can pull through a 3/4” conduit with a 90° sweep with no field termination! Multiple base cables allow this unique interconnect system to be configured for UXGA, Component, S-Video, Composite and Analog or Digital Audio Signals. The soft and pliable PVC jacket is UL listed and CL2 rated for installation in residential systems without a conduit!

The Vanco 280719 HDMI 4x4 Matrix Selector Switch with IR and RS232 Control allows up to 4 HDMI Sources to be shown on up to 4 HDMI displays independently. 

• High Speed Chip Set that Supports 3D, 4K x 2K
• HDCP Compliant
• Supports Digital Audio Format, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD
• Built-in equalization support output
• Fully inspected and tested in the United States 

• On / Off / Brightness Control with adjustable fade rates
• Scene Capable
• Wireless control via RF (Z-Wave technology)
• Digital circuitry provides aesthetically pleasing soft-on and fade-off
• 7 segment green LED bightness display
• Green LED locator light when switch is in OFF position
• 3 Changeable face plates included

Category 6 rated
4 pair 23ga. solid bare copper conductors
CMR,CL2R Riser rated
PVC jacket with ripcord under jacket
Sunlight resistant jacket
Sequential foot markers on jacket
ETL Verified to TIA/EIA-568-B.2-1 requirements.

Tested to 500MHz

$144.00 / 1000ft

The DL85K features a small IR reciever that has been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers etc. - anywhere an inconspicuous appearance is desired.

$100.00

The Intelix DIGI-HDE is based upon HDBaseT technology and extends HDMI with multi-channel digital audio, 100 BaseT ethernet, IR and RS232 over a single, standard ethernet cable. The DIGI-HDE supports 1080p, 3D and 4X x 2K video up to 300 feet. 

• Super Low Profile Design fits 36” - 60” Displays
• Tilt Degree: 0 to 14º
• Mounting profile: 1.1" 
• Built in safety lock
• Load Capacity: 88 lbs

$59.55