Leviton VSOUT-W Outdoor Camera for Leviton High Resolution Color Camera System

The Leviton VSOUT-W The Outdoor camera provides night vision with IR illuminating LEDs, which turn on automatically in low light conditions to provide black and white video images even in zero Lux conditions. The camera comes fully assembled attached to a special single-gang wallplate/ circuit board that includes a balun for clear video over unshielded twisted pair (UTP) cable. The camera also includes power terminals for local power input in situations where the cable run exceeds the 100-meter limit. Connection is made via punch-down of UTP cabling directly to a 110 punch-down strip on the camera or by connection of a Cat 5e patch cord between the camera and a Cat5e jack at the end of a UTP cable run.

The camera mounts using two screws attaching the special single gang wallplate to a single-gang outdoor-rated junction box. The camera’s viewing angle is adjusted via a ball-joint mounting strut that allows 360º rotation and up to +/- 90º tilt. The mounting strut also allows the camera to be turned upside-down for right-side-up viewing when mounted on a ceiling or soffet.

Video baluns are included in both VSOUT-W Outdoor Camera and the VSHUB Camera Hub to ensure clear video over unshielded twisted pair (UTP) cable. The camera also includeS 15 VDC input terminals for a separate power cable in situations where the cable run exceeds the 328 feet (100 meters) limit. This feature enables local powering for applications like entrance gate cameras that are at a long distance from the home.

• High resolution, full color camera with 420 lines
• 4.3 mm lens, the optimum focal length for the widest variety of applications
• IR illumination to 30+ feet (10+ meters) provides black and white image in zero Lux conditions
• Integral single-gang NEMA-style weatherized plate with gasket for quick, simple outdoor mounting to an outdoor-rated, single-gang junction box with two screws
• Manual pan and tilt adjustments allow +/- 180º maximum pan and +/- 90 ºmaximum tilt
• Camera and wallplate assembly are white
• All surfaces accept paint to match house trim
• Single UTP (Cat-5, -5e or -6) cable termination for both video signal and power connection provides a major advantage over two cable systems
• Choice of either 110 D4 or 8P8C to terminate UTP cable at the camera
• T568A wiring termination scheme
• Powering scheme with SMC-mounted Camera board ensures camera power over 24 gauge Cat 5e UTP cable to 100 meters (328 feet)
• Additional 2-conductor screw terminals (Phoenix connector) for local power termination when required; useful when mounting the camera at entrance gates far from the house
• Green power LED on termination board indicated presence of power
• Includes 15 VDC 250 mA power supply